- Environmental protection, no volatile matter, no pollution in storage
- High structural strength and resistance to multiple impacts
- Durability, light weight
- Low thermal conductivity and good thermal insulation effect
- Strong anti-freezing property, no cracking at ultra-low temperature
The polyurethane cold room PU panels are made of lightweight polyurethane with good thermal insulation properties. The splint panel is made of galvanized steel or stainless steel, which can reduce heat transfer caused by internal and external temperature difference and realize freezing, so as to achieve the maximum efficiency of refrigeration system.
Specification of Cold Room PU Panels
Installation of Cold Room PU Panels
Cold
room framework is assembled according to different temperature and
control requirements of different standard modular panel. The cam lock
device at the assembly site has been pre-buried in the corresponding
position during the production. No special tools are required for
on-site installation. The wall of the slab is correspondingly stretched
and integrated, which is simple and convenient. If you need to be able
to disassemble and move to a new location to reassemble, it is flexible
and convenient. After the wall panel is assembled into a cold storage,
the surface is smooth and elegant.
The
choice of polyurethane panel is very important for a whole cold room.
Because the cold room is different from the ordinary warehouse. The
temperature inside the cold room is generally low, the requirements for
air temperature, humidity, and environment are relatively high.
Therefore, we must pay attention to the choice of polyurethane. If the
polyurethane material is not good enough, the temperature of the cold
room will be difficult to control, it will easily lead to deterioration
of the products stored in cold room, or need cooling system to work
frequently, waste more resources, increase costs.
Before starting the assembly of the cold room PU panels, you should make sure that the cam lock devices are at the stop position, then turn the locking devices counter-clockwise using a wrench with force until it stops moving any further.
If you push PU panels together and turn wrench 1/4 turn clockwise. This will engage the male locking device “arm” over female locking device “pin”.
If you keep turning the wrench for another of a turn until the wrench stops moving any further. If there are any problems during the operation of cam locks, you can turn the wrench counter-clockwise with force until it stops moving any further. This will put the locking device at its original position and you can try to assemble the panel again by moving the wrench in a clockwise direction.
About APOLLO Cold
APOLLO cold room PU panels have been exported to many countries such as Canada, Philippines, Africa, New Zealand, United States, etc. Starbucks and McDonald’s are our partners. APOLLO is the professional manufacturer and supplier of cold room, PU panels or the condensing unit system, we will always provide high quality products to our customers. Please don’t hesitate to contact us! cocomo66@outlook.com